Business internet dropouts can come from the NBN network, your provider, office cabling, the router or Wi-Fi coverage. Check outage notices, then compare a wired connection with Wi-Fi near the router and in problem rooms. Record what happens and contact your provider for service faults or IT support for office-network checks.
Why might business internet keep dropping out?
Dropouts can involve the NBN network, your internet provider, cabling or connected equipment. Wi-Fi coverage is another possibility, particularly when the connection struggles in certain rooms but works near the router.
I'd start by noting which computers lose their connection and where they're connected. Check whether a computer using an Ethernet cable also stops working. When you report the fault, describe that difference rather than just saying the internet is down.
NBN Co's service guidance recommends checking cabling, objects that interfere with Wi-Fi and how many devices are connected. Those are things to investigate, not reasons to assume your office setup is at fault.
Is there an NBN or provider outage?
Check both NBN and provider outage notices before changing your office equipment. If neither lists a problem, contact your provider rather than assuming the service is working properly.
- Check your office address on the NBN network status page for maintenance or an incident.
- Check your provider's website for problems on its network, even if the NBN check shows nothing.
- If neither check explains the dropouts, contact your provider and describe what's happening.
That checking order comes from NBN Co's July 2020 service guidance. It also says the status page doesn't cover business NBN Satellite Service or Enterprise Ethernet premises, and directs those customers to their provider first. If you use either service, ask your provider to check it rather than relying on an absent listing.
How can we separate Wi-Fi trouble from a wider fault?
Compare Wi-Fi near the router with a wired connection, then test Wi-Fi in the rooms where work gets interrupted. NBN Co recommends these comparisons to help identify wireless performance and coverage problems.
- Run a speed test beside the router using Wi-Fi and record the result.
- If possible, connect the same computer to the router with an Ethernet cable and repeat the test.
- Test Wi-Fi in the rooms where dropouts happen and note the differences.
Much slower wireless results suggest the Wi-Fi setup needs attention. Differences between rooms can point towards coverage. If wired and wireless results are similar but you're still unhappy with the connection, speak to your provider about further investigation.
For room-specific problems, why Wi-Fi slows down in some rooms explains how placement and obstructions affect the signal.
What should we check before restarting equipment?
Check outage notices and equipment power before restarting, then follow instructions for your provider and connection type. I'd also let staff know before interrupting the office connection.
- Confirm the router and any separate NBN connection equipment are powered on. Note which lights are showing.
- Follow your provider's restart instructions. Telstra's guidance says to switch off the NBN equipment power supply, wait 30 seconds, then restore power.
- Check whether the connection returns. Report any lights that remain red or unlit, along with the equipment model.
Telstra provides different troubleshooting instructions for different connection types. These include an isolation test, which temporarily disconnects equipment to help locate the fault. Ask your provider which instructions apply before connecting a computer directly to an NBN box.
Should we replace the router or change plans?
I'd check placement and compatibility before buying a router or paying for a faster plan. NBN Co advises discussing router compatibility and connection performance with your provider before choosing an upgrade.
For coverage problems, try a central, raised and open router position. Thick walls, metal and appliances can interfere with Wi-Fi. If a better position requires relocating the NBN connection box, speak to a registered cabler.
You can usually find the router's model number on a sticker underneath it. Give that model to your provider and ask whether it suits your plan. Older routers may limit performance, but age alone isn't a reason to replace one.
Who should we contact for help?
Contact your internet provider for unresolved service dropouts so it can troubleshoot and lodge an NBN fault if needed. For router support, start with whoever supplied it: your provider, retailer or manufacturer.
Have your outage checks, wired and wireless test results, affected rooms and equipment-light notes ready. If you need help checking the office side, I can help with business Wi-Fi and networking or work with your current provider.
If your office is in Frankston, give Peninsula IT Solutions a call with those results so we can work out which office-network checks you need.
For help at home, see our Why Wi-Fi is slow in some rooms.
Sources
Need help with this?
If you'd rather hand it over, Peninsula IT Solutions supports small businesses across Frankston and the Mornington Peninsula, onsite or remotely.
View Business Wi-Fi and networking →Send an enquiry →