Check for outages at your full address, then compare a wired connection with Wi-Fi. If wired internet works but Wi-Fi doesn’t, focus on wireless coverage. If both fail, check the router’s power, restart it and contact your provider if the connection still doesn’t work.
Why does my internet keep dropping out?
Internet dropouts can come from maintenance or faults outside your home, or problems with your router or Wi-Fi. Start by checking for an outage, then test whether the connection works through a cable.
A device can show that it’s connected to Wi-Fi while still having no internet access. The eSafety Commissioner’s troubleshooting advice covers this situation: check the router, reconnect to Wi-Fi and compare it with a wired connection.
I’d do those checks before spending money on replacement equipment. In particular, don’t buy a Wi-Fi extender before checking whether the internet works through a cable. An extender is a coverage option, not the first step for an unexplained loss of service.
Is there an NBN outage at my address?
Enter your full street address in NBN Co’s outage checker, then check your internet provider’s website or app. No listed outage doesn’t rule out a fault affecting your individual service.
- Open the NBN outage checker and enter your full address. NBN Co warns that suburb-only searches may be inaccurate for some services.
- Check your internet provider’s outage page or app for a service notice. If there’s an outage, your provider will usually give an estimated restoration time.
- If neither page explains the dropout, continue with the home checks below. Contact your provider if the service still won’t work.
Treat a restoration time as an estimate when deciding whether to wait or contact support. If no outage appears, tell your provider that you’ve checked your address rather than assuming the fault must be inside your home.
Is the problem Wi-Fi or the internet connection?
Connect a computer directly to your router with an Ethernet cable to check whether Wi-Fi is the problem. If internet access works through the cable but not over Wi-Fi, focus on the wireless connection.
- Plug an Ethernet cable into a LAN port on your router and the computer’s network socket.
- Turn off Wi-Fi on that computer for the test, so you’re checking the cable connection.
- Try opening a webpage and note whether it loads.
- If the wired connection works, move on to the Wi-Fi placement checks below. If it fails too, check the router’s power and restart it.
Keep the comparison specific when asking for help: “This computer loads webpages through the cable, but not over Wi-Fi.” If you can’t make a wired connection, tell your provider you haven’t completed that test rather than reporting a Wi-Fi fault.
What should I try before calling my provider?
Check the router’s power and lights, restart it, then reconnect the affected device to Wi-Fi. These steps follow the eSafety Commissioner’s home internet checklist and apply to your router.
- Look at the router’s lights. If they’re off, check that its power cable is connected and the power is switched on.
- Unplug the router’s power cable. Wait 30 seconds to one minute, then plug it back in.
- Wait for the lights to turn back on, then check the internet connection.
- If your device is connected to Wi-Fi but still has no internet, disconnect it from your home Wi-Fi and reconnect.
The restart described here means unplugging the router’s power, not pressing a reset button. If you also have a separate NBN connection box, ask your provider which equipment they want you to check before applying other restart instructions.
What if the wired connection works?
Working wired internet points towards a Wi-Fi problem, so check router placement before buying equipment. Cupboards, brick walls and nearby sources of interference can affect the wireless signal.
Give the router an open position rather than hiding it inside a cupboard or shelving unit. Avoid placing it beside a microwave or behind dense objects such as filing cabinets. If it has an external antenna, check that it’s firmly connected and visibly undamaged.
Moving the router closer to your devices or adding an extender may help with coverage. If the connection changes between rooms, why Wi-Fi is slow in some rooms explains that side of the problem.
When should I get help with the connection?
Contact your internet provider if the service still fails after these checks, even when no NBN outage appears. NBN Co directs customers to their provider because an individual service fault may not appear in its outage checker.
Have your wired test result ready, along with what the router lights showed and whether restarting helped. If you’re concerned about wiring, ask what further checks are needed before arranging cable work.
If wired internet works but Wi-Fi doesn’t, I can help with home Wi-Fi and router setup in Frankston. Have a look at home Wi-Fi help, or give me a call with your wired test result and the rooms where Wi-Fi isn’t working.
For workplaces and small businesses, see our Wi-Fi and networking help for a business.
Sources
- Network status and outages, NBN Co
- What to do when your home internet drops out, eSafety Commissioner
- No internet connection: 5 common nbn issues (and how to fix them), Telstra
Need help with this?
If you'd rather have someone diagnose the problem properly, Peninsula IT Solutions provides local, jargon-free support across Frankston and surrounding suburbs.
View Home Wi-Fi help →Send an enquiry →